Pipe or Big Bore

[YZdRtRyDr125]

What would add more power to a 50: a pipe or a 88cc big bore kit?? Ive seen some big bore kits that arent too expensive and was wondering if they are worth it?

[deltron3030]

b i g b o r e

[Dobe539]

Go with the sano pipe or the two bros pipe, If u have a stock pipe and with a big bore kit the pipe just chockes up the horse power, so go.... and sano and two bros make pipes that work very well with big bore kits, like the FMF power core 4 chockes it up to... i mean you can get a big bore kit and have a stock or FMF pipe and it will still better and faster than stock, but if you want full horse power out of the big bore get a big bore pipe

[clunk]

BIG BORE NO COMPARISON FULL STOP

[YZdRtRyDr125]

will it make a big difference if its a light big bore kit like this? http://www.sik50s.com/kr_retail/product_info.php?cPath=21_23_27&products_id=58

[dagsomdestroyer]

yes it will make a HUGE difference even with a light bore kit

[motox8x]

If you can afford it go big bore 88cc kit... if not fmf power core 4

[RIDEtillDEATH]

does a big gun choke up hp on a 88kit? or should i buy the kit that comes with the pipe too?

[deltron3030]

The Takegawa 88cc BBK available from 5-0 Racing seems like a great kit and I'm going to purchase it sometime in the near future. Anyone have this kit? If so, anything not good about it? I would think that there isn't anything wrong with it....http://www.fiveoracing.com/88cc kit.htm

[RIDEtillDEATH]

ive rode a fifty with the full stage-s kit that comes with the pipe and its nice i like it and ive rode the same kit with a pro circuit pipe, both felt the same to me, i like it but the only think i have to compare it to is the 50cc eng.

[50player]

I have this one and it RIPS!!!! (http://www.motoworldracing.com/xr50_takegawakit88.html) So much more power than stock!

[moto_xer125]

85cc Big Bore Performance Kit (51mm):
- Lightweight Aluminum Cylinder
- 51mm piston with rings, pin, & clip (Made in Japan)
- Complete gasket kit (only head gasket kit is shown in picture).
- High performance camshaft
- 20mm carb assembly (carb, intake, heatstop, gaskets, mounting bolts/wrench, air filter and throttle cable.


$300 brand new. i think it's shegway or something like that. i always see a dude sellin' stuff on ebay and he's saying "this isn't chinese crap". i'm pretty sure this is the stuff he's talking about. but damn, 300 bucks?

[moto_xer125]

oi

[Katoom]

do it if u feel like buying a new motor after a while:rolleyes: (I think)